Banner Tubular Fluorescent Lights - Manual

Sealed fluorescent lights, 8" to 48" tube lengths, ac and dc powered
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com
• Electronic ballast increases lamp frequency and eliminates strobe effect
• Models available with built-in or external ballast. External ballast models provide
shorter, more compact light housing.
• Ideal for illuminating hard-to-reach areas
• Parabolic louver extends the full length of the light opening; reduces glare.
• All models include built-in mounting brackets and a 2.5 m (8') integral cable
• Acrylic tube and strain-relief cable gland for use in wet environments
• IEC IP67 enclosure rating, exceeds NEMA 4X
Built-in ballast models shown
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This product does NOT include the self-checking redundant circuitry neces-
sary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either
an energized or de-energized sensor output condition.
Models
Model Bulb
Length
Ballast Type Connection Supply Voltage Bulb Wat-
tage
HFFW8DC 8"
Built-In Elec-
tronic Ballast
3-conductor, 2.5 m (8') integral cable, untermi-
nated
24V dc
18 W
HFFW12DC 12" 24 W
HFFW14DC 14" 36 W
HFFW8AC110 8"
3-conductor, 2.5 m (8') integral cable with
male plug
100–120V ac 18 W
HFFW15AC110 15" 120V ac 36 W
HFFW12AC 12"
120–277V ac
24 W
HFFW24AC 24" 17 W
HFFW36AC 36" 25 W
HFFW48AC 48" 32 W
HFFW8AC230 8" 100–230V ac 18 W
HFFW15AC230 15" 230V ac 36 W
HFFW8ACR 8"
External Bal-
last
3-conductor, 2.5 m (8') integral cable, untermi-
nated (light to ballast) plus 3-conductor, 2.5 m
(8') cable with male 3-prong plug (ballast to
power source) See wiring.
120–277V ac
18 W
HFFW12ACR 12" 24 W
HFFW15ACR 15" 36 W
HFFW24ACR 24" 17 W
HFFW.. High-Frequency Tubular Fluorescent Lighting
P/N 115387 rev. D 9/7/2012
0 115387 3