Banner RP-LS42 Rope Pull Switches User Manual
Rope pull emergency stop switches, Features
Printed in USA
07/06
P/N 67709 rev. A
Rope Pull Emergency Stop Switches
RP-LS42F-75L.. Series 42 mm Latching Switches with Rope Actuators
Features
•
Positive-opening safety contacts (IEC 60947-5-1), not dependent
upon springs
• Contacts latch open when rope is pulled; requires manual reset
• Heavy-duty thermoplastic housing, rated IP67 and NEMA 4, suitable
for demanding industrial environments
• Innovative design provides quick, easy rope fixing and tensioning on models
RP-LS42F-75LE and RP-LS42F-75LF
• Rope spans up to 75 m (245')
• Both safety contacts are closed with normal rope tension, and open when rope is
pulled or if rope breaks (or if tension is reduced from normal amount)
• Extra contacts for monitoring or to provide dual-channel input to a safety module
• Indicator mark on switch shows when rope has proper tension for operation
• Long life, switch rated at 1 million mechanical operations, minimum
• Three available models: one with E-stop button, all with latching outputs
•
Insulated device (IEC 60947-5-1) on all models with plastic housings