Banner LTB OPTO-TOUCH Optical Touch Buttons - Manual (Page 2)

Model Listing and Hookup Information
(all models have SPDT electromechanical relay output)
Models* Operating voltage, cabling
LTBA5(L) 120V ac, 6-foot attached cable
LTBA5(L)QD 120V ac, 5-pin quick-disconnect base
LTBB5(L) 240V ac, 6-foot attached cable
LTBB5(L)QD 240V ac, 5-pin quick-disconnect base
2
The model SMB30S swivel-mount bracket (p/n 33204) is a
versatile means for mounting a Banner OPTO-TOUCH Optical
Touch Button. The SMB30S lets you ergonomically position
the OPTO-TOUCH on most machinery for maximum operator
comfort and convenience.
The SMB30S mounts by its base. Its swivel ball locks snugly
in place when its two clamping bolts are tightened. Bracket
material is black VALOX
® . Hardware is stainless steel, and
mounting bolts are included.
The photo at the right shows a model SMB30S bracket with an
OPTO-TOUCH attached.
WARNING!
Never use an OPTO-TOUCH Optical Touch Button as an actuator in an emergency stop
(E-Stop) circuit. E-Stop actuators must be purely mechanical devices that require no power to
operate. OPTO-TOUCH Optical Touch Buttons require power to operate and must not be used
as E-Stop actuators under any circumstances.
!
SMB30S
Model SMB30S Swivel Mount Bracket
The OPTO-TOUCH has a 30 millimeter threaded base which fits
directly into a standard mounting hole for an oiltight push button. A
lock ring, supplied with each OPTO-TOUCH, may be used to prevent
switch rotation.
The mounting hole details shown at the right are used for the OPTO-
TOUCH and also for standard oiltight push buttons and their legend
plates. The drawing at the far right shows how to approximate the
keyway using a drill hole.
OPTO-TOUCH LTB Mounting Hole Information
LTB base,
quick-disconnect
models,
side and
end views:
Quick Disconnect (QD) Option
(order model MBCC-512 mini-type cable, 12-foot length, p/n 25496)
Cable connector, end view Cable connector, side view
(MBCC-512 cable): (MBCC-512 cable):
*"L" in model suffix indicates Lexan ® upper housing. See listing, page 3.
LTB Series
Alternate Action OPTO-TOUCH
105 to 130V ac (LTBA5 models)
210 to 250V ac (LTBB5 models)