Hinkley Lighting MERIDIAN 3878SK - Manual

assembly instructions
Family: Meridian Item No. 3878 BN
1. Find a clear area in which you can work.
2.
3. Carefully review instructions prior to assembly.
from the ceiling, and then installing the glass.
start here
3878
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, spread arms (A) located on the main body assembly (1), until
they are equally spaced 60 degrees apart - see Drawings 1 & 3
.
2. (B) see Drawing 2 .
3. Please refer to the hanging instruction sheet (I.S. 19-50) Then
refer back to this sheet to install glass.
1. To install glass, remove socket ring (2) from socket (4)- see Drawing 3 .
2. Slip glass (3) over socket (4).
3. Thread socket ring (2) onto socket (4) to secure glass (3).
4. Fixture can now be lamped accordingly.
5. Thread bulb shield (5) onto socket until snug.
Drawing 1 - Assembly
Drawing 2 - Assembly
Drawing 3 - Glass Installation
3
2
5
1
A
08.03.10R
E
D
B
C
4
A A
A
A A
A
60º
Slid stem along wire and thread onto thread stud (C) -
4. Use quick link (E) to connect chain to fixture loop.
CHAIN
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com