Hinkley Lighting MARION 4473TB - Manual

assembly instructions
Family: Marion Item No. 4473
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main body
of the fixture, making all necessary electrical connections, hanging the fixture from the
ceiling, and then installing the shade.
4473



SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 2 - Fixture Assembly
01.01.12
1. Rotate arms (A) until they are approximately 72 degrees apart - see Drawing 1.
2. Slip loop (1) along wire and thread onto tube at top of center column (2)
- see Drawing 2.
1. To install crystal pendant (3) hook onto small loop (B).
2. To install shade (6), slip shade onto fixture and align hole in tab (C) of shade with
holes in tab (D) of fixture arm.
3. Slip screw (4) through holes in shade tab and arm tab and thread on ball knob (5)
to secure shade. Repeat for remaining tabs.
4. Fixture can now be hung from the ceiling, please follow mounting instruction sheet
IS-19 provided.
1
3
C
4
5
6
2
A
Drawing 1 - Fixture Assembly
B
D
start here
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com