Hinkley Lighting BOLLA 4666OB - Manual

assembly instructions
Family: Bolla Item No. 4666
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, hanging the fixture from the ceiling, and then
installing the glass.
start here
4666



SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Please refer to the hanging instruction sheet (I.S. 19-75) provided to continue
installation of this fixture. Then refer back to this sheet to install glass.
1. To install glass, remove socket ring (3) from socket (A).
2. Slip glass (1) over threaded socket (A).
3. While holding glass in position, slip spacer (2) over threaded socket (A).
4. Thread socket ring (3) onto socket (A) to secure glass (1).
5. Fixture can now be lamped accordingly.
Drawing 1 - Fixture Assembly
A
1
2
3
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com