Hinkley Lighting TRAFALGAR 1312 - Manual

assembly instructions
Family: Trafalgar Item No. 1312 MB/MO
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, and then
hanging the fixture from the ceiling.
start here
1312
Note: Maximum wattage for 1312 fixture is 40 watts per bulb.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Prior to hanging, fixture can now be lamped accordingly.
2. Attach the top roof (A) by lining up holes in cage (C) with threaded holes in roof and
securing with barrel knobs with studs (B) - see Drawing 1.
3. Please refer to the hanging instruction sheet (I.S. 19) provided to complete
installation of this fixture.
A
C
Drawing 1 - Fixture Assembly
B B
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com