Hinkley Lighting BENTLEY FR44504BBZ - Manual

FR44504bbz
BENTLEY
Bulbs: 4-60 W CAND. Replacement Parts: Crystals: R44504CRY, R44505CRY
Shade: R44504SH
01.01.11
800.421.3517 WWW.FREDRICKRAMOND.COM
[DRAWING 1]
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by assembling the main body of the
fixture, installing the mounting hardware to the junction box, making all necessary
electrical connections and then hanging the fixture.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1 Slip center stem (1) along wire and thread onto threaded tube (2),
- See Drawing 1.
2
3
4
Slip candle sleeve (4) over socket (5).
6
STEP 2 Refer to Hanging Instruction Sheet [FRIS19-100] to hang fixture and complete
assembly.
1
3
2
4
5
6
10
13
14
15
8
7
12
9
16
17
Making sure that every other arm of the spider (s) is located over one of the
lower arms of the main body (3).
s
Attach one end of shade rod (6) to the arm of the spider (7) that is located
between the lower arms of the main body.
1 Attach crystal (9) to spider arm (10) that is located over the arms of the main body (3).
Attach the free end of shade rod (6) to loop (8) located inside the shade (11) rim.
repeat process with remaining shade rods.
3 Slip polished tube cover (13) over tube (12), followed by crystal (14). Hold parts in position.
4 Thread decorative knob (15) onto end of tube (12) and tighten.
Fixture can now be lamped accordingly.
STEP 3
5 Attach crystal (16) to hook located on the bottom of the shade rim at location (17).
located on the top of the main body (3)
- See Drawing 1.