Hinkley Lighting BENTLEY FR44502BBZ - Manual

FR44502BBz
BENTLEY
[DRAWING 1]
[DRAWING 2]
Bulbs: 60W CAND. Replacement Parts: SHADE : R44500SH CRYSTAL: R44500CRY
01.01.11
800.421.3517 WWW.FREDRICKRAMOND.COM
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first installing the mounting strap to
the junction box, making all necessary electrical connections, mounting the fixture to
the wall attaching the crystals, installing the candle sleeve and then attaching the shade.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
STEP 2 Make electrical connections from supply wire to fixture lead wires.
Refer to instruction sheet (I.S. 18) and follow all instructions to make all necessary
wiring connections. Then refer back to this sheet to continue installation of this fixture.
STEP 3
STEP 4
1 Slip candle sleeve (1) over socket (2) - see Drawing 2.
2 Slip shade cup (3) onto top of candle sleeve (2).
3 Thread tail (4) onto bottom of arm assembly (5).
4 Attach crystal pendalogues (6) to end of arms (7).
crystal 6
R44500CRY
3
1
2
4
5
7
6
1 Prepare mounting strap (a) by threading nipple into the center hole of
the mounting strap (a), approximately 1/4“- see Drawing 2.
2
Attach mounting strap (a) to junction box (j) using two screws (b) provided.
1 To mount backplate to wall, slip center hole of backplate (e) over nipple (c) and
hold fixture in position - see Drawing 2.
2
Thread decorative knob (d) onto end of nipple (c) and tighten to secure fixture. 3
Fixture can now be lamped accordingly.
d
a j
e
c
b
f
5
Slip spider assembly (f) over nipple (c) and hold in position.