Hinkley Lighting PLANTATION 2122PZ - Manual

assembly instructions
Family: Plantation Item No. 2122 PZ
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first hanging the
fixture from the ceiling, making all necessary electrical connections, and then
installing the fixture glass.
start here
21
22
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Please refer to the hanging instruction sheet (I.S. 19) provided to hang this fixture.
Then refer back to this sheet to continue installation of this fixture.
1. Prior to installing glass, fixture can now be lamped accordingly.
2. To install glass, thread center stem (2) into harp assembly (1).
3. Slide glass (3) onto fixture and hold in position.
4. Slip cast bottom (4) onto center stem (2) and hold in position
5. Thread bottom knob (5) onto end of center stem (2) to secure glass (3).
Note: Hand tighten only, tightening with tool may cause damage to glass.
Drawing 1 - Fixture Assembly
3
1
2
4
5
3
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com