Hinkley Lighting CAPE COD 2200 - Manual

Family: Cape Cod Item No. 2200
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first installing the
mounting hardware to the junction box, making all necessary electrical connections,
attaching the fixture to the wall.
start here
2200
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: Maximum wattage for 2200 fixture is 75 watts per bulb.
Drawing 2 - Fixture Assembly
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections. Then
refer back to this sheet to continue installation of this fixture.
9.14.09
A J
B
C D
E
1. Prepare mounting strap (A) by threading 1” nipple (C) into the center hole of the
mounting strap (A), approximately 1/4“ - see Drawing 1.
2. Attach mounting strap (A) to junction box (J) using two screws (B) provided.
Drawing 1 - Fixture Mounting
assembly instructions
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com