Hinkley Lighting CASA 3503OL - Manual

assembly instructions
Family: Casa Item No. 3503 OL
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. To assemble fixture, holding wires tight, thread loop (A) onto nipple (B).
2. Thread finial (C) onto nipple (D).
3. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture. Then
refer back to this sheet to continue installation of this fixture.
1. Slip tube (H) over socket (I).
2. To attach crystals, hang crystal drop (E) from small ring (F) and repeat with remaining
crystals .
Note: small ring (F) is located on finial (C).
3. Hang crystal (J) (without glass bead) from ring (K).
4. Fixture can now be lamped accordingly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging the
fixture from the ceiling, and then attaching crystal pendalogues.
start here
3503
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 1 - Fixture Assembly
A
3
D
C
B
F
E
H
I
F
J
K
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com