Hinkley Lighting PROSECCO FR49437RCO - Manual

FR49437RCO
PROSECCO
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first installing mounting hardware to
junction box, making all necessary electrical connections, hanging the fixture and then
installing the fixture shade and crystals.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1 Refer to Hanging Instruction Sheet [FRIS19-75] to hang fixture. Then refer
back to this sheet to continue installation of this fixture.
STEP 3
1 To install shade, remove socket ring (1) from socket (2)- See Drawing 1.
2 Slip shade (3) over socket (2) and hold in position.
3 Thread socket ring (1) onto socket (2) and hand-tighten to secure shade.
4 Fixture can now be lamped accordingly.
STEP 4
This Prosecco semi-flush uses 4 sizes of crystal pendalogues.
1 Working from the top of the fixture down, attach small crystal pendalogues (1)
to eyelet (a) - See Drawing 1.
2 Attach extra large crystal pendalogue (4) to eyelet (b) .
3 Attach longest crystal pendalogues (2) to eyelets (c) .
3 Attach large crystal pendalogue (3) to eyelets (d) .
[ DRAWING 1 ]
Bulbs: 75W MED. Replacement Parts: SHADE: R49437SH CRYSTALS: R49430CRY-B10, R49430CRY-b2,
R49430CRY-C1, R49430CRY-C2
2.19.09
800.421.3517 WWW.FREDRICKRAMOND.COM
1
2
a
3
crystal 1
R49430CRY-B2
crystal 2
R49430CRY-b10
crystal 3
R49430CRY-C1
crystal 4
R49430CRY-C2
b
c
d