Hinkley Lighting PLYMOUTH 4248OB - Manual

assembly instructions
Family: Plymouth Item No. 4248 OB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, and then hanging the fixtre from the ceiling.
start here
42
48




SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Slip top cap (4) with loop, along wire and thread onto top of fixture - see
Drawing 1.
2. Spread the arms (A) until they are equally spaced 60 degrees apart - see Drawing 2.
3. Spread the arms (B) until they are equally spaced 120 degrees apart, and equally
spaced between the arms (A).
4. Slip candle sleeve (2) through ring, and over socket (1). To prevent scratching the
candle sleeve when slipping it through the ring, wrap the sleeve in a piece of paper.
After candle sleeve is set, the paper can be removed.
5. Set shade (5), on top of harp (3) and thread in knob (6) to secure it.
6. Thread bottom finial (7) onto coupler (8) located at the bottom of the fixture.
7. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture.
Then refer back to this sheet to continue installation of this fixture.
1. Remove socket ring (3) from socket (1) - see Drawing 1.
2. Slip glass (2) over socket (1) and thread socket ring (3) back on to socket to secure.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
A
A A
A
A
A
B
B
B
60º
120º
4
8
wire
6
5
3
2
1
A
B
7
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com