Hinkley Lighting AVA FR42876VBZ - Manual

ASSEMBL Y INSTR U CTI O NS
The construction of this fixture will be accomplished by first assembling the main body
of the fixture, making all necessary electrical connections, hanging the fixture from the
ceiling and then installing the fixture shade.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
CAMEO
FR42876vbz
AvA
STEP 1
Slide the glass (4) onto the cross bar (1) in place to allow the screw (2) to
pass through the openings in bother the glass and the cross bar, then thread
the cap (3) onto the screw.- See
Drawing 1 .
STEP 2
Refer to Hanging Instruction Sheet [FRIS19] to hang fixture. Then refer
back to this sheet to continue fixture installation.
STEP 3
Slide supply wire through center stem (A) and thread into top of cluster
assembly (B) - See Drawing 2
STEP 4
Take the oval rings (C) and hook them through the corresponding hooks on the
ceiling mount, then attach cage (D) by hooking the other end of the oval rings in
place. – See Drawing 3.
01.01.13