Hinkley Lighting CASA 4304OL - Manual

assembly instructions
Family: Casa Item No. 4304 OL
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body, installing the mounting hardware, making all necessary electrical
connections, hanging the fixture from the ceiling and then installing the glass.
start here
4304
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer to the hanging instruction sheet (I.S.19-75) provided to complete
installation
Drawing 1 - Assembly
4
3
2.20.09
1. Remove socket ring (5) from socket (B) - see Drawing 1.
2. Slip glass (6) over socket (B).
3. Thread socket ring (5) onto socket (B) and tighten to secure glass.
4. Fixture can now be lamped accordingly.
1. Take the upright (2) and thread it into loop (A) found on the main crossbar (1).
Note: the upright with the supply wire running through it will have to be slipped down
the wire - see Drawing 1.
2. Attach secondary canopy (3) to the uprights using a chain link (4) provided.
3
2
5
1
6
B
A A
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com