Brady TLS2200 - Manual (Page 34)

33
Creating a Serialized Bar Code Label
Legends to be printed:
BRADY
6
BRADY
A101 A101
A101 A105
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
Legend Type: Text
1. Repeat steps 1-12 from “Creating a Bar Code Label”.
2. Press <
=
> to positon the cursor under the last character.
3. Press <Func> + <Serial>.
4. When “No. to Serial? “ prompt appears, enter 5 , then press <Enter>.
5. When “No. of Copies?” prompt appears, enter 1
6. Press <Enter> or <Print>. The printer will begin printing one each of the five serialized
barcode labels from A101 to A105.
Creating a Terminal Block Label
NOTE: This example assumes you have the terminal block label roll PTLTB-400-375
loaded in your printer.
Legends to be printed: 101 through 110
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
Legend Type: Text
1. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default
value of 6.
2. Press <Func> + <Setup> to access the Setup Menu.