Hinkley Lighting SUSSEX 4799EZ - Manual

assembly instructions
Family: Sussex Item No. 4799 EZ/BN
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
fixture body, installing the mounting hardware, making all necessary electrical connec-
tions, hanging the fixture from the ceiling and then installing the fixture shades.
start here
4799
Note: Maximum wattage for 4799 fixture is 60 watts per bulb.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble fixture, spread arms (A) of main body fixture (1), until they are equally
spaced 60 degrees apart - see Drawing 1.
2. Spread arms (B) until they are equally spaced 60 degrees apart and equally spaced
between the two lower arms (A).
3. Spread arms (C) until they are 120 degrees apart.
4. Slip center column (1) along wire and thread into coupler (2).
5. Slide cap (3), tube (4) and knob nut (5) onto nipple (6).
6. Thread loop (7) onto nipple (6).
7. Slip candle cover (8) onto socket (9).
8. Fixture can now be lamped accordingly.
9. Attach shade (10).
10. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture and
complete installation.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
2.20.09
A A
A
A A
B
B
B
B
B
B
A
C C
C
60º
60º
120º
7
5
4
6
10
8
9
3
1
2
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com