Hinkley Lighting MONDO FR49296PCM User Manual
Mondo
FR49296PCM
MONDO
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first assembling the fixture, making
all necessary electrical connections and then hanging the fixture.
SAFETY WARNING:
Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1
Rotate arms (a) and (a1) until they are equally spaced 30 degrees apart - See
Drawing 1.
2
To install glass, remove socket ring (b) from socket (d)
- See Drawing 2.
3
Slip glass (c) over socket (d).
4
Thread socket ring (b) onto socket (d) and tighten using socket ring tool provided.
5
Fixture can now be lamped accordingly.
6
Thread bulb shield (e) onto socket (d).
STEP 2
Refer to Hanging Instruction Sheet [FRIS19-20] to hang fixture and complete
installation.
[DRAWING 1]
[DRAWING 2]
Bulbs:
60W G9
Replacement Parts:
GLASS: R49292GL BULB SHIELD: R4750BLSH
2.17.09
800.421.3517 WWW.FREDRICKRAMOND.COM
a
a1
a
e
c
d
b
a1
30°