Hinkley Lighting NEST FR41622ORB User Manual

Nest

Advertising
background image

FR41622ORB

NEST

ASSEMBLY INSTRUCTIONS

Assembly of this fixture will be accomplished by first attaching the mounting hardware

to the junctin box, making all necessary electrical connections, mounting the fixture to

the ceiling and then installing the glass.

SAFETY WARNING:

Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply off during installation. If new wiring

is required, consult a qualified electrician or local authorities for code requirements.

STEP 1

1

Prepare mounting strap (a) by threading the two long mounting screws (b)

into the back of the mounting strap (a), making sure the holes into which the

screws are threaded match the spacing of holes (d) in the backplate (e)

- See

Drawing 1.

2

Attach mounting strap (a) to junction box (j) using two screws (c).

3

Make electrical connections from supply wire to fixture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this fixture.

4

To mount fixture, slip the two mounting screws (b) through the two mounting

holes (d) in the canopy (e).

5

While holding fixture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

STEP 2

1

Slip studs (1) through holes in top of crossbar (2), making sure not to pinch any

wires during the process.

2

Thread barrel nuts (3) onto end of studs (1) and tighten.

3

Prior to installing glass, fixture can now be lamped accordingly.

4

To install glass, thread center tube (4) into coupler (5) approximately 3/8”.

5

Slip glass (6) onto center tubing (4) and hold in position.

6

Slip cap (7) onto center tubing (4) and hold in position.

7

Thread hex nut (8) onto center tube (4) and tighten to secure glass (6).

8

Slip bottom cap (9) onto center tube (4) and hold in position.

9

Thread barrel cap (10) onto end of center tube (4) and tighten to secure parts.

[DRAWING 1]

[DRAWING 2]

j

a

c

1

2

3

4

5

e

d

f

b

Bulbs:

75W MED.

Replacement Parts:

GLASS:

R41622GL

10.23.09

800.421.3517 WWW.FREDRICKRAMOND.COM

7

8

9

6

10

Advertising