Hinkley Lighting SAN CLEMENTE 2443 - Manual

assembly instructions
Family: San Clemente Item No. 2443 MB/OI/CB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first installing the
mounting bracket, making all necessary electrical connections, hanging the
fixture from the ceiling, and then installing the glass.
start here
24
43
1. To install glass, thread center stem (2) into coupler (6) located in the center of ceiling
pan (1) - see Drawing 1.
Note: Beaded end of of stem threads into coupler.
2. Fixture can now be lamped accordingly.
3. Slip cage assembly (3) over center stem (2) and hold in position.
4. Slip cap (4) onto center stem (2) and hold in position.
5. Thread ball knob (5) onto end of center stem (2) and hand tighten.
Drawing 2 - Fixture Mounting
1
Drawing 1 - Fixture Assembly
3
6
2
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then return back to this sheet to continue installation of this fixture.
5
1. To prepare mounting bracket, install screws (A) into mounting plate (B), making
sure screws line up with holes (C) in the canopy (D) - see Drawing 2.
2. Attach mounting plate (B) to junction box (J), using screws (G) provided.
1. To mount the fixture, slip canopy (D) over screws (B) and hold fixture in position -
see Drawing 2.
2. Thread ball knobs (E) onto the end of screws (B) and tighten to secure the fixture to
the ceiling.
4
5
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com