Hinkley Lighting PLYMOUTH 4258OB - Manual

assembly instructions
Family: Plymouth Item No. 4258 OB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, and then hanging the fixture from the ceiling.
start here
42
58

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Slip top cap (2), with loop attached, along wire and thread onto top of fixture (1).
2. Slip candle sleeve (3) through ring, and over socket (4). To prevent scratching the
candle sleeve when slipping it through the ring, wrap the sleeve in a piece of paper.
After candle sleeve is set the paper can be removed.
3. Thread bottom knob (6) onto coupler (5) located at the bottom of the fixture.
4. Please refer to the hanging instruction sheet (I.S. 19) provided to complete
installation of this fixture. Then fixture can be lamped accordingly.
Drawing 1 - Fixture Assembly
2
1
3
4
5
6
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com