Hinkley Lighting HARPER 3641 User Manual

Start here, Assembly instructions

Advertising
background image

assembly instructions

Item No. 3641

1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.

*** The construction of this fixture will be accomplished by first attaching the
mounting strap to the junction box, making all necessary electrical connections,
hanging the fixture from the ceiling, and then installing the glass.

start here

3641

Drawing 3 - Fixture Assembly

Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.

***It is recommended you have some assistance when installing the glass on this
fixture.

1. Main body of fixture (1) can be mounted to the ceiling and lamped accordingly prior
to installing the glass - see Drawing 3.

2. Slip glass (3) into ring (2).

3. Lift ring (2) with glass (3) and slip inside uprights (U) and align holes (H) in ring studs

(S) with holes (T) in uprights (U) and thread in knurled knobs (4) to secure glass to
fixture.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

01.01.13

Drawing 2 - Fixture Mounting

Drawing 1 - Strap Detail

J

B

A

G

D

E

C

1. Prepare mounting strap (B) for mounting by installing screws (A) into mounting
plate (B) - see Drawing 1.
Be sure the holes into which the screws are threaded match the spacing of holes (C)
in the canopy (1) - see Drawings 1 and 2.
2. Attach mounting plate (B) to junction box (J), using screws (G) provided and slip
supply wires through large center hole.

1. Hang the fixture by slipping canopy (D) over screws (A) and hold in position - see
Drawings 1 and 2.
2. Thread barrel knobs (E) onto end of screws (A) and tighten to secure fixture to ceiling.

1

3

4

2

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

U

S

H

T

Advertising