Hinkley Lighting VALLEY FORGE 2075 - Manual (Page 2)

HINKLEY LIGHTING 33000 Pin Oak Park way Avon Lake, Ohio 44012 800 446 5539 w w w.hink leylighting.com
star t here
assembly instructions
2070
2
3
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** fixture will be accomplished by first, installing mounting hardware, making
all necessary electrical connections, mounting fixture to wall, installing the
mirror and candle sleeves, installing the glass, and then attaching the door.
Item No. 2070 / 2074 / 2075
01.01.13
2074 2075
Drawing 4 - Door detail
Drawing 3 - Glass Installation
1. After fixture is properly mounted to wall, slipped mirrored reflector (3) throught
the door frame and behind the socket assembly (4) - see Drawing 3.
2. Slip center hole (H) in mirrored reflector (3) over mounting knob (D), and line up
secondary holes (S) in mirrored reflector (3) with threaded holes (T) in back panel
of fixture.
3. Thread ball knob with stud (5) into hole (T) in back panel of fixture to secure mirrored
reflector (3). DO NOT use a tool to tighten part (5), over tightening could cause reflector
damage.
4. Slip candle sleeve (6) over socket.
5. Fixture can be lamped accordingly at this time.
1. To complete fixture assembly it is necessary to attach the door (6) to the fixture.
2. Slip pin (P) out of door assembly (6) - see Drawing 4.
3. Place door on front of fixture and align door hinge and slip pin (P) back into place
to attach door.
4. Latch (L) can be slipped into lower part of latch on cage to lock door (6) shut.
5. Fixture assembly is completed and power can be restored.
P
L
hinge
S
H
D
T
6
3
4
5
6