Hinkley Lighting MARCELLINA 4404GR - Manual

assembly instructions
Family: Marcellina Item No. 4404 GR
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. To assemble fixture, slip loop (1) along wire and thread onto threaded tube (B) at the
top of fixture - see Drawing 2.
2. Rotate arms (A) until they are equally spaced 45 degrees apart - see Drawing 1.
3. Slip candle sleeve (3) over each socket (C) - see Drawing 2.
4. Slip glass bobesche (4) over candle sleeve (3).
5. Slip glass cup (5) over each candle sleeve (3).
6. Thread large crystal ball (6) onto threaded tube (D), located in the center of the fixture.
7. Thread one of the small crystal ball (7) onto threaded tube (E).
8. Fixture can now be lamped accordingly.
9. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture. Then
refer back to this sheet to continue installation of this fixture.
1. To attach crystals, thread the remaining small crystal ball (7) onto threaded tube (F)
at the bottom of the fixture - see Drawing 2.
2. Hang crystals (8) from areas indicated.
*** The construction of this fixture will be accomplished by first rotating the fixture
arms into the correct position, assembling the basic fixture, installing the mounting
hardware, making all necessary electrical connections, mounting the fixture to the
ceiling and then hanging the crystals.
start here
4404
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
3
1
B
E
7
8
6
12.10.08
8
8
D
F
7
5
4
3
C
A
A
A
A
A
A
A
A
A
45º
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com