Hinkley Lighting CELLO 4564AT - Manual

assembly instructions
Family: Cello Item No. 4564 AT
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, attaching the mounting strap to the junction box,
making all necessary electrical connections, hanging the fixture from the
ceiling, and then installing the glass.
start here
4564
Drawing 1 - Fixture Assembly
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: Maximum wattage for 4564 fixture is 100 watts per bulb.
1
2.7.08
1
2
33
A A
A 6
7
8
2
A C
9
4
5
1. Slip center column (1) along wire and thread onto coupler (A).
2. Attach arms (B) to center column (1) using ball knobs (2) provided.
3. Remove ball knob studs (3) from socket plate (C).
4. Place perforated diffuser (4) on top of socket plate (C) and attach using ball knob
studs (3) removed previously.
5. Thread bottom center stem (5) into coupler (D) and lock in position by thighten
hex nut (E) against coupler (D).
6. Fixture can now be installed, please follow instruction sheet (IS19) provided.
After hanging fixture please return to this section for glass installation procedures.
A B
D
E
bala
1. To install glass first slip center stem (5) through center hole in glass (7) and hold
in position.
2. Thread hex nut (7) onto center stem (5) and tighten to secure glass.
3. Slip cap (8) onto center stem (5) and hold in position.
4. Thread decorative knob (9) onto center stem (5) and tighten to complete assembly.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com