Hinkley Lighting STOWE 4728MC - Manual

assembly instructions
Family: Stowe Item No. 4728 MC
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body of the fixture, installing the mounting hardware, making all necessary electrical
connections, hanging the fixture from the ceiling, and then installing the glass.
start here
4728


SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, rotate arms (A) outward until they are equally spaced 60
degrees apart - see Drawing 1.
2. Rotate arms (F) outward until thet are evenly spaced 120 degrees apart and equally
spaced between the uprights (B).
3. Attach top of upright (B) to top of main body (1) using the knob and stud (E)
provided - see Drawing 2.
4. Slip loop (C) along wire and thread onto threaded tube (D).
5. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture. Then
refer back to this sheet to install glass.
Drawing 2 - Glass Installation
Drawing 1 - Fixture Assembly
2
4
5
1
3
2
A
F
C
1. To install glass, remove socket ring (4) and spacer (5) from the socket (2) - see
Drawing 1.
2. Slip glass (3) over socket (2).
3. Slip spacer (5) and thread socket ring (4) onto socket (2) and tighten.
4. Repeat steps 1-3 for remaining glass.
5. Fixture can now be lamped accordingly.
B
E
D
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com