Hinkley Lighting MIDDLEFIELD FR40573IRR User Manual
Middlefield
fR40573IRR
MIDDLEFIELD
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first assembling the body of the
fixture, installing the mounting hardware to the junction box, making all necessary
electrical connections, hanging the fixture and then installing the fixture glass.
SAFETY WARNING:
Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
Refer to Hanging Instruction Sheet [FRIS19] to hang fixture. Then refer back
to this sheet to continue installation of this fixture.
STEP 2
1
Slip candle sleeve (3) over socket (s) - See Drawing 1.
2
Hanger decorative wood penatlog (4) onto hook (h) locate at bottom of fixture.
NOTE: chain lenght on decorative pentalog can be adjusted to any length you prefer.
[DRAWING 1]
Bulbs:
3-60W CAND.
STEP 1
1
First slip loop (1) along supply wire and thread onto stem (2) and tighten.
- See Drawing 1.
2
Fixture can now be installed, please return to this section to completer assembly
after installation.
2
3
1
4
s
h
01.01.13