Hinkley Lighting TRELLIS 1439 User Manual

Start here, Assembly instructions

Advertising
background image



















































































- 1 -

____

Assembly Instructions

____

Item No. 1439

start here

---

1. Find a clear area in which you can work.
2. Unpack Fixture and glass from carton.
3. Carefully Review Instructions Prior to assembly.

***

The construction of this fixture will be accomplished by first assembling the

main body of the fixture, installing the glass, attaching the mounting strap to
the junction box, making all necessary electrical connections, and mounting the
fixture to the wall.

Drawing 2 – Fixture Assembly

1. To assemble main body, remove ball knobs (A) from back plate (C) and remove
retainer plate (G) - see Drawing 1.
2. Slip wire from junction box (B) through the 9/16’’ dia. access hole in the retainer
plate (G).
3. Remove appropriate knock outs from the star pattern on the retainer plate (G)
that match the mounting hole location on your junction box (B).
4. Mount retainer plate (G) to the junction box (B) using the screws provided.
5. The top and bottom ends of the retainer plate have additional attachments
points that can be used. To attach the plate at these points use the wood screws
(D) provided.

SAFETY WARNING: READ WIRING AND GROUNDING
INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS.
TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW
WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR
LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. To install glass (2) in cage assembly (1), slip bottom of glass panel into channel (7)
in the bottom of the cage - see Drawing 2.
2. Slip top of glass panel (2) under glass clip (6). - Note: cut gasket material supplied
to size and place between glass and clip.
3. Fold over glass clip (6) to secure glass in cage (1).
4. Prior to attaching the cage, slip candle sleeve (5) over sockets.
5. To attach completed cage (2) to roof assembly (3) line up holes in cage top and
roof.
6. Then thread ball knob stud (4) into roof to secure cage.

Drawing 1 – Mounting Detail

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

Advertising