Hinkley Lighting PLANTATION 4889BB - Manual

assembly instructions
Family: Plantation Item No. 4889 BB/PZ
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging
the fixture from the ceiling, and then installing the fixture glass.
start here
4889
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Spread top tier of arms until they are 120 degrees apart. Spread second tier of arms
60 degrees apart. Spread bottom tier of arms 30 degrees apart.
2. Thread bottom finial (2) onto bottom of main body assembly (1) - see Drawing 1.
3. Please refer to the hanging instruction sheet (I.S. 19-50) provided to continue
installation of this fixture. Then refer back to this sheet to continue install glass.
1. To install glass, slip shade harp (3) onto the candle sleeve (A) - see Drawing 2.
2. Attach shade (2) by placing over shade harp (3) and threading shade finial (4) into
threaded hole on top of shade harp (3).
3. Repeat steps 1 and 2 for remaining arms.
4. Slp center glass (5) into the center glass fitter (B).
5. Take center harp (6) and thread into socket (C) to hold glass in place.
6. Thread crown (7) onto top of harp (6).
Drawing 1 - Fixture Assembly
Drawing 2 - Glass Installation
3
1
2
4
2
3
7
6
5
C
B
A
5.30.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com