Tools needed – Blue Rhino 91000 User Manual
Page 2
Cleaning emitter and burner. Series 6000-93000 LP Gas 405121
2
®
For assistance call 1.800.762.1142.
Cleaning emitter and burner. Series 6000-93000 LP Gas 405121
3
®
For assistance call 1.800.762.1142.
Tools needed:
• #2 Phillips screw driver
• 7/16 wrench
• Needle-nose pliers
• Non-abrasive scouring pad
• Bottle brush
• Pipe cleaners
• Air hose or can of compressed air
• Rubber gloves
1. Installation and repair should be done by a qualified service person.
2. Use only Blue Rhino Global Sourcing, LLC. factory authorized parts. The use of any
part that is not factory authorized can be dangerous. This will also void your warranty.
Contact 1.800.762.1142.
3. Do not use flammable solutions or material to clean heater or heater parts. Use only
warm soapy water to clean outside of heater.
4. Do not submerge control valve in water.
DANGERS and Cautions