Hinkley Lighting KEY WEST 1612RB - Manual

assembly instructions
Family: Key West Item No. 1612 RB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Fixture can now be lamped accordingly.
4. To complete assembly of this fixture, Line up studs (2) on the cage with the holes (3) located in the
roof assembly (1).
5. Thread ball knob (4) onto the stud (2) to secure cage (5) to roof asssembly (1).
*** The construction of this fixture will be accomplished by first making all necessary electrical
connections, mounting the mounting strap to the junction box, mounting the fixture to the
ceiling, and then assembling the main body of the fixture.
star t here
1612
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 1 - Fixture Assembly
Make electrical connections from supply wire to fixture lead wires. Refer to instruction sheet (I.S.
18) and follow all instructions to make all necessary wiring connections. Then refer back to this
sheet to continue installation of this fixture.
01.03.12
2
1
4
3
5
- See drawing 1.
1. Please refer to the hanging instruction sheet (I.S. 19) provided to continue installation of this fixture.
Then refer back to this sheet to install glass.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com