Hinkley Lighting PLYMOUTH 4245OB - Manual


assembly instructions
Family: Plymouth Item No. 4245 OB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Slip candle sleeve (2) through ring, and over socket (1). To prevent scratching the
candle sleeve when slipping it through the ring, wrap the sleeve in a piece of paper.
After candle sleeve is set, the paper can be removed - see Drawing 1.
3. Set shade (4), on top of harp (3) and thread knob (5) into harp (3) to secure shade.
4. Thread bottom knob (6) onto coupler (7) located at the bottom of the fixture - see
Drawing 2.
5. Please refer to the hanging instruction sheet (I.S. 19-75) provided to complete
installation of this fixture.




*** The construction of this fixture will be accomplished by assembling the
main body of the fixture, and then hanging the fixture from the ceiling.
start here
42
45





Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
5
4
3
2
1
7
6
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com