Hinkley Lighting STRATFORD 1352 - Manual

assembly instructions
Family: Stratford Item No. 1352 AU/MB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, and then hanging the fixture from the ceiling.
start here
1352
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: Maximum wattage for 1352 fixture is 100 watts per bulb.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer to the hanging instruction sheet (I.S.) provided to complete installation
of this fixture.
Drawing 1 - Glass Replacement
11
14
15
13
12
Glass Replacement Instructions - see Drawing 1.
1. Remove roof (2) from cage (1) by unscrewing the 2 ball knobs (3) on inside of fixture.
2. Remove the 4 glass clips (4) by removing the screws (5) that hold them in place.
3. Pull up on glass and remove.
4. To replace the glass follow steps 1-3 in reverse order.
4.1.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com