Brother DCP-377CW - Manual (Page 19)

19
Macintosh
Wireless Network
Windows
®
Macinto
sh
Wirele
ss Network
Install the drivers & software (Mac OS X 10.3.9 or greater)
13
Before you install
MFL-Pro Suite
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
14
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon to install.
c
Choose Wireless Network Connection, and
then click Next.
d
Click on the Wireless settings checked and
confirmed check box, and then click Next.
Follow the on-screen instructions.
e
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
f
The Brother software will search for the Brother
device.
g
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
h
When this screen appears, click OK.
Note
• If your wireless settings fail, the installation of
the MFL-Pro software will be terminated.
Confirm your network settings. If you encounter
this failure, go to step
11-a on page 15 and
setup the wireless connection again.
Finish
The installation is now
complete.