Hinkley Lighting NEST FR41616ORB User Manual
Nest
FR41616ORB
NEST
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first assembling the main body,
installing the mounting hardware to the junction box, making all necessary electrical
connections, hanging the fixture from the ceiling and then installing the fixture glass.
SAFETY WARNING:
Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1
Slide yoke (b) along wire and slip studs (1) through holes in top of cross bar (2),
making sure not to pinch any wires during this process.
2
Thread barrel nuts (c) onto end of studs (1) and tighten.
STEP 2
Refer to Hanging Instruction Sheet [FRIS19-75] to hang fixture.
STEP 3
1
To install glass, slip glass (e) over fixture socket (d) and hold in position.
2
Slip spacer (f) over socket (d).
3
Using socket tool provided, thread socket ring (g) onto socket (d) and tighten to
secure glass (e).
4
Fixture can now be lamped accordingly.
[DRAWING 1]
Bulbs:
100W MED.
Replacement Parts:
GLASS: R41614GL
6.18.09
800.421.3517 WWW.FREDRICKRAMOND.COM
b
1
2
a
e
d
g
socket
tool
f
c
c