Hinkley Lighting YORKTOWN 3622AN User Manual

Start here, Assembly instructions

Advertising
background image



assembly instructions

Family: Yorktown Item No. 3622

1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.

1. Prepare mounting strap (A) by threading 1-5/8” nipple into the center hole of the
mounting strap (A), approximately 1/4“.- see Drawing 1.

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided.

1. To mount fixture, slip center hole of backplate (E) over nipple (C) and hold fixture in
position - see Drawing 1.
2. Thread decorative knob (D) onto end of nipple (C) and tighten to secure fixture.

1. To prepare the sockets to accept the candle sleeves, it will be necessary to lock them
in postition. To accomplish this, first tilt bulb socket and bracket (1) up in a vertical
position- see Drawing 2.
2. Slip the socket and bracket (1) down until the two tabs (2) engage the notch (3) that
is in the base socket bracket (4).
3. Tighten screw (5) to lock sockets in position. Repeat for remaining sockets.
4. Slip candle sleeves (6) over sockets (1) followed by candle chaser (7) and repeat for
remaining sockets - see Drawing 3.

*** The construction of this fixture will be accomplished by first attaching the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall, and then assembling fixture

start here

3622

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 3622 fixture is 60 watts per bulb.

Drawing 1 - Fixture Mounting

Drawing 2 - Fixture Assembly

Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.

5

1

A

J

B

C

D

E

10.15.10

Drawing 3 - Fixture Assembly

1

6

7

5

2
3

4

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

Advertising
This manual is related to the following products: