Recommended input wiring methods – Bogen CAM8 User Manual

Page 15

Advertising
background image

Recommended Input Wiring Methods

These are the best ways to connect sources to the mixer.The mixer input is always balanced.
From the drawings below choose the wiring method for your input device (either balanced
or unbalanced).

Balanced Source to Balanced Input - Normal (Method 1)

Shown below is the normal wiring method for a balanced source device. It has +6dB gain and
excellent ground current and noise rejection.

Balanced Source to Balanced Input - Method 2

If the method above does not work in your application, use the wiring shown below. This
method can solve certain ground loop problems. It has +6dB gain and good noise and ground
loop rejection.

Unbalanced Source to Balanced Input - Method 1

For an unbalanced source device, the drawing below shows the best wiring method. Because
of the design of the mixer, this wiring provides a slight (+6dB) boost, and moderate noise and
ground loop rejection.

Unbalanced Source to Balanced Input - Method 2

For an unbalanced source device, the drawing below shows an alternative wiring method.
Because the grounding of the minus input is not to the mixer ground, this method does not
provide the +6 dB boost. Ground current and noise rejection is good.

-
+

-

+

+

-

Gnd

Balanced Source

G

-

+

-

+

+

-

Gnd

Balanced Source

No connect

G

-
+

-

+

+

Gnd

Unbalanced Source

G

-

+

-

+

+

Gnd

Unbalanced Source

G

Page 15 of 32

Advertising