Hotpoint Ariston CG 64 SG3 R/HA - Manual (Page 25)

GB
25
Analogue timer
Setting the clock and timer
The oven must be connected to the electricity supply.
Pull the knob and turn it in an anticlockwise direction
to set the correct time.
! The clock operates electrically, therefore if the
electricity supply is interrupted it will stop.
Once the electricity supply has been restored it will be
necessary to repeat the procedure described above
for setting the time.
Timer feature
The timer feature allows you to enter a specific
amount of time and counts down from this time to
zero. This feature does not switch the oven on or off; it
merely sounds when the set time has elapsed.
• Turn the knob in an anticlockwise direction until the
marker corresponds with the desired time (internal
scale), which can be seen through the “window”.
The timer begins counting down immediately. To
stop the buzzer, or to use the timer function on its
own, turn the marker to the symbol.