Watts WQC4RO13-100PT - Manual (Page 2)

Watts Water Quality & Conditioning Products
800-659-8400 (press 2 for sales)
Email: [email protected]
watts.com
© Watts 2008
SS-WQP-KWCHG-0839
Replacement elements
Models
Note: All models listed above use 3/8" tubing from unit to tank to faucet. All models come with designer, top mount air gap faucets.
MODEL NUMBER STAGE
CAPACITY
(GPM)
SIZE
ELEMENTS
FAUCET TANK
WQC4RO11-50PT 4 50 11" Top mount RO-PRO®
WQC4RO11-50MT 4 50 11" Top mount Metal
WQC4RO11-50MTLR 4 50 11” Long Reach Metal
WQC4RO13-100PT 4 100 13" Top mount RO-PRO®
WQC4RO13-100MT 4 100 13" Top mount Metal
WQC4RO13-100MTRL 4 100 13" Long Reach Metal
MODEL ELEMENT SEDIMENT CARBON MEMBRANE G GA AC C
50 GPD System 11" WQCSC11 WQCCC11 WQCM11-50 WQCGAC11
100 GPD System 13" WQCSC13 WQCCC13 WQCM13-100 WQCGAC13
Watts ® Kwik-Change RO systems are so easy to service
you'll get great quality water every time!
Conventional RO Systems
Conventional RO systems may provide high quality water.
However, cartridges and membranes are difficult to replace
because they are installed in housings and must be removed.
This procedure includes the need to shut off and drain down
the system, open the housings with a wrench, remove
catridges, empty water from the sumps, clean the filter and
membrane housings, replace cartridges, re-pressurize, and
check for leaks.
Because conventional systems are difficult to service, routine
maintenance may be delayed. Therefore, consumers may not
get the quality water they desire, unless a qualified dealer is
called to service their system.
Kwik-Change RO System
No Sumps! No Mess! No Fuss!
• Hinge bracket for easy handling.
• Automatic shut off when cartridges are removed
with a simple, 1/4 turn.
• No need to disconnect tubing when replacing membranes.
• Integrated check valves between cartridges and
membrane prevent back-flow.
• Cartridges have double o-rings so they will not leak.
• Quick connect fittings for easy installation.
VS.