Buffalo Technology WLI-U2-AG108HP - Manual (Page 20)

20
Client Manager Configuration
Once the Connect button is pressed, you will be prompted to enter any encryption related
information.
The Encryption drop down list allows you to
select the type of encryption for the network.
The correct encryption type should already be
selected automatically.
The Encryption Key is where the actual key
required by the wireless network must be
inputted. Please consult your wireless access
point or router’s documentation for proper
input of the encryption keys. Some wireless
networks may allow you to enter multiple keys;
four separate fields are available for this. If your
network only uses one encryption key, then
please use field 1 to enter your key.
The Register Profile option will store this wireless
network in your profiles. This means you will automatically connect to this network
when inside its range. This is recommended if you plan on using this wireless network
more than once.
Press the Connect button once you have completed entering the information.