Watts 3591B - Manual

Series 35
Quick-Connect
Manifolds
Watts Quick-Connect Manifolds are designed and manufac-
tured for many years of trouble free service. Produced of off
white Polysulfone, a high performance thermal plastic material,
the Watts Quick-Connect design allows for quick and easy
connections without the use of installation tools.
Specifications
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and re-use without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Example
3589-1810
35 = Series 35
89 = Type 89 Single Union Body
1810 = 1"CTS x 1 ⁄
2
"CTS
Caution: The polysulfone material used in the Quick-Connect fittings can
be compromised by exposure to volatile organic compounds (VOC’s) and
caustic chemicals. Therefore, DO NOT expose this product to any such
chemical or foreign substance, which would include exposure to the fol-
lowing products: Pipe Dopes (thread sealants), bug sprays, lubricants,
cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and
cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based
caulks, hydrocarbons, spray foam of foaming agents (insulation).
It is also recommended that all threaded connections be made with Teflon
®
tape only.
For Residential and Commercial Applications
ES-QC-35Manifolds
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
3589
3583
3590 3584
3585
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.