Watts PWSPSE - Manual

For Residential and Light Commercial Applications
ES-WQ-PWSPSE
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
PWSPSE
Connection Size: 1" (25mm)
Flow Rate: Up to 15.5 gpm (59 lpm)
The Series PWSPSE water softeners are designed for resi-
dential and light commercial use applications ranging from
30,000 to 90,000 grains of hardness removal capacity at
flow rates up to 15.5 gallons per minute
Features
• Complete whole house water treatment system
• State-of-the-art computer programming to increase
efficiency, save salt and water
• Uses downflow regeneration
• Demand regeneration for highest efficiency
• 5 cycles, all fully adjustable, strong durable Noryl
®
Valve body
• Weather resistant enclosures
• Full flow bypass valve included
Pro SE Series Control Valve
Manufactured from high-tech materials the Pro SE Series valve
has been engineered and tested to withstand the equivalent
of 27 years of uninterrupted daily use. The proprietary design
features a Teflon ® coated piston that works with a seal and
spacer. This seal/spacer and piston configuration is the most
reliable design in control valve technology.
Electronic Control
The Pro SE Series valve features an advanced electronic
control for easy programming. Adjustable brining, adjustable
reserve, high efficiency regeneration and simplified program-
ming are now standard.
Softening Media
The exchange media is a high-capacity cation polystyrene resin
that combines high operating capacity with excellent chemical
and physical stability for long, dependable life.
PURE WATER
Resin Tank
Features a non-corrosive fiberglass tank with thermoplastic
inner liner. The tanks are NSF/ANSI Standard 44 or 61 certified.
Brine Tank / Cabinet
The brine tank is a combination brine maker and salt storage
vessel and is made of tough, corrosion free high-density poly-
ethylene. Brine refill is controlled by the advanced electronic
controller, to provide the correct amount of brine for each
regeneration.
Noryl ® is a registered trademark of SABIC Innovative Plastics™.
Teflon ® is a registered trademark of E.I. du Pont de Nemours and Company
or its affiliates.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Series PWSPSE
Pro SE Residential and
Light Commercial Water Softeners
Note: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system.