Watts FMRO5GP-115V User Manual

Reverse osmosis systems, Reverse osmosis diagram, For safe, great tasting drinking water

Advertising
background image

Reverse Osmosis Systems

For safe, great tasting

drinking water.

FEED WATER GUIDELINES

Maximum TDS

1,800 ppm

Iron, max.

0.2 ppm

Hardness, (less than)

7 gpg

Hydrogen sulfide

0.0 ppm

Manganese, (less than)

0.05 ppm

Turbidity, (less than)

1 NTU

Pressure, min. / max, psi

40/100

Temperature, range (F)

40°/100°

pH

3-11

Note: Pretreatment suggested if conditions exceed parameters.

MAINTENANCE & WARRANTY

Pre and post filters

Recommended change every six months for regular usage,

or once a year in light usage. RO membrane change

recommended based on periodic TDS rejection tests.

Typical is every two years.

Warranty

Components are warranted for one year from installation,

excluding membrane, pre & post filters. See installing dealer

for system warranty.

Distributed by:

®

DEDICATED FAUCET

FOR RO WATER

Caution: Do not use where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. System
must be maintained according to manufacturer’s instructions.

Reverse Osmosis Diagram

© Watts 2008

B-WQP-RO-0830

Advertising
This manual is related to the following products: