Beko D 8300 SM - Manual (Page 7)

en en
3
Get to know your device
Warning
Below information about accessories are
supplied just for reference. Below accessories
may not be exactly same as the accessories
of your appliance.
How to use the accessories
Crisper separators (Fig. 7-a)
The separators inside the crisper are designed
to protect fruits and vegetables against
bruising.
Crisper humidity controls (Fig. 7-b)
This has been designed to keep your
vegetables fresh, without losing moisture.
For this purpose, cold air circulates around
the crisper. The amount of cold air passing
out of the crisper can be regulated with the
controls found on the front of its cover. You
may set the humidity-control knob to the
position appropriate to adjust the degree of
moisture and coldness of the foodstuffs inside.
If you want these to cool further, set the control
to “Open”, if you want them to cool less but
retain their moisture for a long period, set it
to “Closed”. Positions in between allow you
to regulate cooling and moisture-retention as
you desire.
Sliding storage boxes (Fig. 7-c)
This accessory is designed to use the door
shelves’ volume more efficiently. Moving those
boxes right or left helps to easily settle high
bottles to the shelf below.
Bottle and can rack (Fig. 7-d)
This accessory can be used for storing either
a bottle or 3 pieces of cans side by side
A)
B) Freezer compartment
Fridge compartment
Fig. 1
Ice cube tray
Freezer shelf
Interior light
Thermostat knob
Fridge compartment shelves
Bottle and can rack
Defrost water collection channel - Drain
tube
Crisper humidity controls
Crisper cover
Salad crisper
Adjustable front feet
Dairy compartment
Door shelf
Egg tray
Sliding storage boxes
Bottle shelf 1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.