Watts W-4040-TW - Manual

®
WATER QUALITY & CONDITIONING PRODUCTS
Watts ® residential membranes (thin film composite)
Part Number Application O.D. Length Capacity No. Per
(GPD) Case
W-1812-24 Tap water 1.8” 11.75” 24 25
W-1812-36 Tap water 1.8” 11.75” 36 25
W-1812-50 Tap water 1.8” 11.75” 50 25
W-1812-75 Tap water 1.8” 11.75” 75 25
W-1812-100 Tap water 1.8” 11.75” 100 25
Note: W-1812-100 membranes are packaged in preservative and should be kept in a cool environment if stored for a prolonged period of time.
Watts membrane specifications
Data W-1812-24 W-1812-36 W-1812-50 W-1812-75 W-1812-100
Membrane type TFC TFC TFC TFC TFC
Material Polyamide Polyamide Polyamide Polyamide Polyamide
Charge Negative Negative Negative Negative Negative
Configuration Spiral-wound Spiral-wound Spiral-wound Spiral-wound Spiral-wound
Salt rejection 96% 96% 96% 96% 96%
Max. operating temp. 113˚F / 45˚C 113˚F / 45˚C 113˚F / 45˚C 113˚F / 45˚C 113˚F / 45˚C
Max. operating pressure 125 psi 125 psi 125 psi 125 psi 125 psi
Max. turbidity (NTU) 1 1 1 1 1
Max. SDI 5 5 5 5 5
pH range 3-10 3-10 3-10 3-10 3-10
Flux 24 gpd 36 gpd 50 gpd 75 gpd 100 gpd
Note: Specifications based on 77˚F (25˚) temperature and 60 psid pressure.
A FEED
B
E
C
D
PERMEATE
CONCEN TRAT E
BRINE SEAL O-RING
OUTER TAPPING
CONCENTRAT E
Dimensions: A = 0.67”; B = 0.87”; C = 11.8”; D = 1.77” and E = 0.87”.
Watts ® membranes
We offer a complete line of residential and commercial membranes for tap, brackish and sea
water applications. Our thin film composite membranes meet or exceed industry standards, with
salt rejection rates ranging from 96 to 99.5 percent. Residential membranes are listed below.