Watts PWSCAB30K - Manual

For Commercial Applications
ES-WQ-PWSCAB30K
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
PWSCAB30K
The Water Softening Process
Hard water contains high levels of dissolved minerals, typically
in the form of calcium and iron salts. Water softening reduces
the hardness of water using an ion-exchange process. Hard
water enters the softener, passing through the ion-exchange
media where the minerals are removed by attaching to the
resin media. The softened water then flows out to the point-of-
use. As the minerals build up on the media, the softening abil-
ity of the media gradually reduces until the softener switches
to the regeneration cycle that removes the minerals from the
media. Brine (salt solution) is circulated through the media and
is released to drain, carrying away the hardness minerals. The
softener then returns to normal operation, resuming the soften-
ing process.
Features
• Unique, space-saving low profile design is ergonomically
engineered for easy salt fill and storage capacity...holds
170 pounds of salt
• Ultra safe 12 volt system so you don't have to worry about
electrical wiring
• Built-in self-cleaning media for sediment and dirt reduction
• High-capacity, premium softening media ensures maximum
efficiency for hardness and clear water iron reduction
• Unique safety shutoff valve eliminates overflow
• Exclusive distribution system ensures maximum contact
with media
• Manufactured using only the finest materials and processes
• Set the electronic control with one button regenerates based
on exact water used. No guess work, no waste. Space
saving design installs under sink or in limited space
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
PURE WATER
Model
PWSCAB30K
Space Saver 30K Cabinet
Whole House Water Softening Systems
Connection Size: 1" (25mm)
Flow Rate: Up to 10 gpm (37.8 lpm)
Note: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used
on disinfected waters that may contain filterable cysts.