E-flite AT-6 Texan 25 ARF - Manual (Page 10)

10 E-flite AT-6 Texan ARF Assembly Manual
 6. Slide a clevis retainer onto a nylon clevis. Thread the
clevis onto one of the 20 7 /
8
-inch (530mm) pushrod wires.
 7. Slide the pushrod wire into the opening in the fuselage
that aligns with the stabilizer control horn. Snap the clevis
onto the elevator control horn.
 8. Repeat Steps 6 and 7 for the remaining elevator
pushrod installation