E-flite Byp Yak 3D ARF - Manual (Page 4)

4
Quique Somenzini’s Competition Radio
Equipment
Listed below is the exact radio equipment that Quique
Somenzini uses when flying the Byp Yak in competitions. In
the back of the manual, we also provide you with his exact
radio setup, listing his dual rates, exponential, and mixing
programs.
Transmitter
JR 9303 XP9303 9-Channel, 30-Model Memory
Transmitter
Purchase Separately
JSP30610 6-Channel UltraLite Rx w/o Crystal,
Positive Shift JR/Air (72 MHz)
JRPXFR** FM Receiver Crystal
JRPS281 DS281 Sub-Micro Digital (3)
Alternative Radio Equipment
You will need a minimum 6-channel transmitter (for proper
mixing and dual rate capabilities), crystals, micro receiver,
and three sub-micro servos. You can choose to purchase a
complete radio system that includes all of these items or, if
you are using an existing transmitter, just purchase the other
required equipment separately.
We recommend the crystal-free, interference-free Spektrum ™
DX6 2.4GHz DSM ™ 6-channel system, which includes a
micro receiver and 4 sub-micro servos.
Complete Radio System
SPM2460 DX6 DSM 6CH Park Flyer w/4-S75
Or Purchase Separately
JSP30610 6-Channel UltraLite Rx w/o Crystal,
Positive Shift JR/AIR (72MHz)
JSP30615 6-Channel UltraLite Rx w/o Crystal,
Negative Shift Fut/HRC (72MHz)
JRPXFR** FM Receiver Crystal (JR only, not
AR6000)
Or
SPM6000 AR6000 DSM 6CH Park Flyer Receiver
And
EFLRS75 7.5 Gram Sub-Micro Servo (3)
JRPA092 Servo Extension, 3" Standard (may be
needed for ESC)