E-flite Carbon-Z Cub PNP - Manual (Page 4)

EN
®
AS3X System
Horizon Hobby has always made RC sport, scale and unique aircraft with
the kind of performance experts appreciate. First used in Blade
® ultra micro
fl ybarless helicopters, MEMS sensor technology within the Artifi cial Stability--3
axis (AS3X) System has been specifi cally tuned for airplanes helping invisibly
correct for turbulence, torque and tip stalls.
Now the exclusive AS3X Stabilization system makes the leap from Ultra Micro
aircraft to high performance parkfl yers with the AR635 receiver. The preci-
sion and performance available from AS3X equipped Ultra Micro airplanes has
heralded a new era of performance, and with the AR635, that performance is
introduced for larger airplanes.
The outstanding control agility delivers an ultra smooth, locked-in feel that
obeys your every command with performance that’s natural feeling. It’s so
gratifying, in fact, that it’s as though you’re the RC pilot of an expertly tuned,
giant-scale aircraft. Welcome to AS3X, your parkfl yer will never be the same! To
see what we mean, go to www.E-fl iteRC.com/AS3X.
Receiver Selection and Installation
The Spektrum AR635 receiver is recommended for ths airplane. If you choose
to install another receiver, ensure that is at least a 6-channel full range (sport)
receiver. Refer to your receiver manual for correct installation and operation
instructions.
Installation (AR635 shown)
1. Remove the screw (A) and radio hatch (B) from the top of the fuselage.
2. Install your full range (sport) receiver in the fuselage using double-sided
servo tape.
3. Attach the elevator and rudder servo connectors to the appropriate chan-
nels of the receiver.
4. Attach the aileron Y-harness to the aileron channel of the receiver.
5. Attach the Flaps Y-harness to the AUX1.
6. Attach the ESC connector to the throttle channel of the receiver.
A
B
4